Home >
Products >
Automatic Packing Line >
Aluminum packing line >
Autoamtic aluminum extruded proflie stacking line.
Products Introduction
One of the ways my company reduces the amount of labor needed to install profiles is by equipping technicians with a scanning system. This system automatically identifies the width of the profiles and determines how many can fit in a layer, which has reduced bruising from rear transport as well as labor intensity. It also has other advantages.
Technical parameters
Brand |
FHOPE |
Model |
customzied aluminum profile stacker |
Highest speed |
0.512M/S (Main lift) |
Highest speed |
0.256M/S (Left and right movement ) |
Lowest speed |
0.1M/S (Main lift ) |
Lowest speed |
0.026M/S (Left and right movement ) |
Maximum lifting load |
250kg/lift |
Single piece lifting load |
100kg/lift |
Shortest length |
3000mm |
Longest length |
7000mm |
Voltage : |
380V 50HZ |
Advantage:
1.Reduces manual labour and save cost
2.Reduces lost caused by aluminium profile scratches
3.Reduces occupational injuries among staff for operation safety.
Comparison:
What are the benefits of this machine on the manufacturing floor? It’s so smart and automatic that it doesn’t require manual operation.
Categories:
All Products,
Coil Packing Line,
Steel Tube Packing Line,
Plastic Pipe Packing Line,
Aluminum packing line
Working principle
1.Aluminum profiles are attached to a conveyor chain and stacked on top of each other, with their heights set by the automatic aluminum profile stacker. Layers of aluminum profiles are merged together to form batches.
2.After being formed in batches, the stacker will take these aluminum profiles and stack them on a cart, then take them to the furnace for homogenizing.
3.The automatic aluminum profile stacker is controlled by a central computer and can be operated accurately and smoothly. This is because of its advanced braking system, and it is powered using electrical power.