Categories: All Products,L-Bar Shrinking Machine,Motion Sealer Shrinking Machine,Bundle Sleeve Shrink Machine,Horizontal Flow Shrinking Machine,Automatic Shrinking Solution
Produced for single products with no under support , SK-080A is easy to connect with production line and operate the feeding, wrapping, sealing, shrinking, freezing fully automatic. Different ways for package forming: 10 bottles(1*10)、（2*5）、9 bottles(3*3)、12bottles(3*4)、15bottles(3*5)、24bottles(4*6).......

1.SK-080A adopts world's leading technology and workman craft, both reliable and safe.

2.“Siemens PLC” and programmable controller are chosen, the electrical, mechanical, and pneumatic components are integrated to one system.

3.Packing products according to production requirement such as two lines, three lines, four lines... with or without under support. 

4.Worm gear reducer has been used, bringing the best performance with no vibration.

5.Special designed sealing knife is used, the sealing line is firm, does not crack and is not easy to stick the knife

6.Automatic feeding fixture choosing depends on the bottle shape.

7.For colorful packing materials, we can use the color coding system to do positioning.

8.Mode designing changes when bottle shapes change.

9.Conveyor can be designed to in-feed from the right side or left side according to the working place requirement.

10.SK-080A adopts double air motor, the hot air volume in the furnace chamber is even, and the effect is beautiful after shrinkage.

11.The solid steel pole is used to outsource the imported silicone rubber tube, which is transported by chain bar, and the silicone is durable.

12.Conveying speed is controlled by frequency inverter, easy to operate.

13.Optional to add roller table next to the exit of shrink tunnel, prevent falling to floor.
14.SK-080A can add the function of shaft sealing, which is specially designed for the products with smaller package volume.


 

Model	SK-080A
Sealing type	sleeve sealing
Power supply	380V/50-60Hz/3phase
Max product size	420(L) x 300(W) x 300(H)
Packing capacity	8-18 packs per minute
Film type	polyethylene (PE) film
Max film size	600(width) x 280mm (outer diameter)
Power consumption	max. 20.5kw
Tunnel oven size	1800mm(L), entrance 600(W) x 400(H) mm
Tunnel conveyor speed	variable, controlled by frequency converter
Tunnel conveyor	chains with silicon coated rods
Working height	850-900mm
Air pressure	≤0.5MPa(5 bar)
Sealing system	Durable“U”shape alloyed sealing knife and saw teeth cutting knife with anti-stick Teflon coats
Operating panel	Siemens colorful touch screen, PLC, omron temperature controller
Machine material	carbon steel
Weight	1050kg