How to do a good tension packing for the coil by film

wrapping
2 min read
coil stretch film packing machine

The coil packing by stretch film:
It shows the coil film wrapping about big ring for small coil OD.
The package surface is full of wringkle by poor tension control.
So it needs a good tensioner to resolve the problem. If you have same problem in coil packing, SHJLPACK will help to resovle this problem. Following is the problem for poor coil packing by stretch film.

Poor Packing By The Machine Without Special Tensioner

The solution to resolve the stretch film packing for steel coil

The video shows the special designed tension controller for keeping the stretch film tension no matter ring and film roll in any angle. It helps to pack the coil with sealed film wrapping for moisture and dust protection. That is the good way to help the steel coil, wire coil, aluminum coil for sea worth packaging.

Good Packing By The Machine With Special Tensioner

The testing sample size: OD750mm Width 1000mm ID;510mm

Height of the wrapping ring adjustable per different coil OD that will motor and gear drive.

Packing material finishing or broken alram for stop the machine and alram for reloading.

Supportive rollers for holding the coil in wrapping.

More coil wrapping machines: https://www.shjlpack.com/products-and-production/coil-packing-machine/

Related Articles

steel wire compacting and strapping machine price
Uncategorized

steel wire compacting and strapping machine price

1.How many coils can be compacted and strapped and how many can be wrapped in an hour?---2.Do you supply 4 automatic strapping heads so the strapping is done at one time?---Yes3.What type of coil carriers are needed for this system and do you supply them?4.What is the breaking load of the straps?5.Voltage is 415 V not 380 as it says in some parts of the quotes.---ok, it will be 415v.6.What is the Tension draw back device?---For coil wrapper, this device will make good packing performance when large OD and large height. 7.What is the IP rating of the switching cabinets. It should be IP55.--Ok, the price will add USD8.How many days do you need for their engineers and how many engineers for installation and commissioning assistance.---About a week, two engineers.9.No mention or price of the tilters for spools in the spec and the quote.---The tilter is revised in quotation. Please check.10.We need a breakdown between the compacting/strapping and the wrapping.--Ok. Steel wire coil compacting and strapping machine with wrapping solutions A

Dec 8, 2020 1 min read