Rod Wrapping Machine

Application

GG series rod wrapping machine is mainly designed for metallurgical industries and metal industries. The machine can be widely used for stainless steel pipe, rob, copper rod and aluminum profiles. After the wrapping, the object will be kept in a good condition with tidy-look.

Features

 

1. PLC & HMI systems are optional for special requirement.

2. Indicator alarms automatically indicate troubles.

3. Special conveyor is easy for loading and conveying the package, it strengthens the transfer capacity.

4. Wide packing belt not only can make the work more efficient, but be used for cutting the packing cost.

5. Our rod wrapping machine is equipped with double-ring and double-rub wheel devices.

6. Photocell sensor is for setting packing position.

7. The turning ring is controlled by a converter. Overlap rate could be adjusted according to the special needs.

8. Height of the ring centre could be changed.

9. Separate control panel makes operation and maintenance easily.

Technical Data

Items GG300 GG400

Package width 100-300mm 100-400mm

Package length Not limited Not limited

Conveyer length 9000mm*2 Or on request 9000mm*2 Or on request

Conveying speed About 8m/min About 7m/min

Rotating speed About 60r/min About 50r/min

Conveyer height 800mm 1000mm

Max loading 100kg 200kg

Overlap scope About 30%-70% About 30%-70%

Power output About 7kw About 9kw

Power voltage 380V/3phase/50Hz 380V/3phase/ 50Hz

Material Compound paper tape/knit tape/anti-rust tape/waterproof tape/ stretch film/flax Compound paper tape/knit tape/anti-rust tape/waterproof tape/ stretch film/flax

Material size width:≤250mm Max OD:400mm ID:55mm width:≤250mm Max OD:400mm ID:55mm