90 Degree Mechanical Coil Tilter FZ-05
It maybe caused accident, damage the mould, harm operator, broken hoisting facility by using traditional manual operation to maintain the large and middle mould, loading & unloading the heavy steel coil in the port and process the large component.
90 degree mechanical coil tilter FZ-05 is mainly used for tilting large and middle mould, convenient to open the mould safely. It is widely used in mould maintenance factory, dispatching port to reduce the steel coil collision and protect the steel coil from damaging. Tilting large and middle mould, deduct the labor force and cost. This mechanical coil tilter is adopted home and abroad advanced technology and design concept, it is stable, safe and durable.
The mechanical coil tilter FZ-05 is convenient operation and easy maintenance. Following are the brief introduction of machine operation (take steel coil for example):
Hoist and load steel coil to the coil tilter working stable → centering steel coil → rotate the supply power switch on “ON” position → press “tilt” button for tilting → tilter stop automatically → hoist and take out the tilted steel coil. A operation process is finished. (step 1) (step 2) (step 3)
The mechanical coil tilter is strong and durable, there is seldom components need to maintenance except to brush the oil on the chain & bearings regularly, tight the chain tension if it is loose. The maintenance is very easy and simple.